Anti-static epoxy floor coating is a method that is usually preferred to give your floor a joint-free finish. Come up with high chemical resistance and decorative properties. Anti-static epoxy flooring can be applied to your car parking surface to give more durability. Because the regular wear and tear chance are more on your car parking surface. The frequent car moving from your garage is a major concern. Therefore, Substrate preparation is required to get high performing coat. The coat has to be applied to the concrete surface, and that coat resistance must be hard, sound, and free from dust. Avoid other barrier materials like paint, lime, coatings, plaster, curing agents, and laitance
If you want your car parking surface to look nice and beautiful. Just go through the process here.
The method of using the Anti-Static Epoxy Flooring
Before mechanical preparation, use a degreaser to remove polish, wax, grease, and oil. scabbling, scarifying, grinding, or shot blasting equipment are mainly used on Contaminated concrete surfaces. vacuum equipment is used to clean the traces and dust or debris, this step is called the mechanical method.
All the Substrates should be cleaned up from laitance and then allow to dry up a maximum of 5% moisture content. Preparing the surface there is a need for Surface grinders and shot blasting. Before the application of primer, the surface should be cleaned and free from dust.
It is not correct to use the Primer-contents that are mixed before mixing. The solutions should be mixed slowly using a slow-speed drill and paddle. This solution can be mixed for at least 4 minutes. After that primer is applied to the dry surface @ 0.2 to 0.25Kg/per square meter through Brush/Roller.
Laying of copper Tape
A copper strip is required to measure the width and thickness. The adhesive side copper strip is exposed, when butter paper is removed first. Fix the self-adhesive copper strip on the clean primed substrate. The fixing distance may be between 1 to 4 meters to each other, lengthwise and breadthwise. Stick the self-adhesive copper strip at the side close to the walls within a distance of 6 inches. Extend the copper strips at one end in the room to bring them out for earthing connection.
It consists of three components self-leveling system. One is natural black. The base coat should be applied after drying of primer. Normally it takes 6 – 8 hrs. Anti-static epoxy floor coating, can best one; that can enhance your Car Parking Floor surface to look nice and give more durability.
The same top coat has also the same three components self-leveling system. A wide range of color options are available from that wide array, you can choose any one of your needs. This coat is applied after the base coat dries up. A minimum gap of 12 hrs for applications topcoat. For better bonding between top coat and base coat, emery paper is recommended use. Before applying this coat, the surface should be cleaned, and checked that surface is free from any dust particles.
Follow the blog, mentioned here about the steps of Anti-static epoxy floor coating, which surely can help you. You can add this flooring option to your car parking surface to give an antic and classy look. Make your car parking surface more durable so that it can resist wear and tear situations. Car parking basements are more prone to tear and wear conditions only this coating can prevent it. Look nice and awesome when you have a coat on your garage parking surface.