Why is my whirlpool washer not turning on. If you are still unable to restart the washer, try to reset it by unplugging the electrical outlet and turning off the power at the circuit breaker. Then, turn on the power again and wait until the machine has completely stopped.
Next, re-plug the electrical outlet and try starting the washer again. If you’re still having trouble, contact the repair service provider for assistance.
We hope you found this article useful. Do you want to help us spread our knowledge? Do you want to earn extra cash or credit? Please consider donating, subscribing, or linking your referral sites to ours.
Why is my whirlpool washer not turning on
Incoming Power Problem
If you are having trouble with your washing machine, the first thing to try is resetting the circuit breaker. It is better to do this in the morning before you start doing anything else. After you have done this, the next thing to try is to reposition the switch.
If you have a digital readout, it should be between 110 and 120 volts. It could be that there is something wrong with your washer itself, or it could be that there is a short circuit or a broken wire.
If you have a digital display, it should show a reading between 110 and 120. There might be minor fluctuations, but this is normal.
The circuit breaker is tripped, which means that the current is too high. If the breaker is properly positioned and is still tripped, it might be broken. Here is guide about Whirlpool washer not spinning clothes dry
Thermal fuse might be defective
A malfunctioning thermal fuse is the main reason why a Whirlpool washer won’t start. If you find yourself in this situation, there is nothing else to do but call the experts. They can help you to locate the thermal fuse and then replace it.
You should not attempt to fix the thermal fuse yourself because you could damage it. If you have any questions about thermal fuses, you can contact your local Whirlpool repair shop. They can tell you whether or not the thermal fuse needs to be replaced.
If you have a problem with the thermal fuse, the first step is to test it with a multimeter. This way, you will find out whether or not it is defective. If the thermal fuse is defective, it will not pass the continuity test.
Washer Controls Are Locked
Washers usually have control buttons for start, wash, spin, rinse and dry cycles. These buttons are located at the top of the front of the machine. Some washers may have buttons for more features, like temperature settings.
These buttons are often labeled “Control Lock.” This feature can be enabled by pressing a button on the control panel. When the Control Lock button is pressed, the control panel will show a number with a “L” or “C” in it. The “L” or “C” represents the number of buttons that were pressed during the last cycle.
For example, if you press Start and Wash, the number displayed will be “LC.” This means that you pressed the Start and Wash buttons, which will lock the control panel.
Timer might be defective
It’s easy to figure out if the timer is the issue. First, switch off the power to your washer. Then, locate the timer. Remove it from the washer or disconnect it. Next, test the timer with a multimeter to see if it passes the continuity test.
If it doesn’t, you’ll need to replace the timer. Once the new timer is installed, check to see if it starts. If it doesn’t, we recommend you contact a qualified technician to inspect your washer to see if they can find the cause of it not starting.
A qualified technician can help you to determine the exact cause of your washer not starting. They will also suggest the best repair option to make your machine function properly again.
Conclusion
In conclusion, the most common reason for a washing machine not to turn on is a faulty switch. The switch is a small, round piece of plastic that sits on top of the washer.
When the switch is closed, it connects the washer’s electrical circuit to the motor. When the switch is open, it disconnects the circuit, stopping the motor. Here is homeabout.org
Related Guide
